cns650-m series 650 watt ac-dc power supplies total power: 650 watts input voltage: 90 - 264 v # of outputs: single special features ? designed for forced air and natural convection cooling ? medical and ite safety approvals, 2x mopp ? pmbus ? interface ? active current share with or-ing fet ? dual fused ? type bf ready ? active power factor correction, 61000-3-2 compliant ? built-in class b emi flter ? less than 1u high ? 4 x 6 u-channel construction (open-frame or end-fan variants available for 12 v) ? <500 mw no-load power consumption ? 80 plus ? certifed (-me model) ? three-year warranty (consult factory for extended terms) safety ? ul/csa es60601-1/c22.2 no. 60601-1 ul 60950-1/c22.2 no. 60950-1 ? tv en 60601-1 ? demko en 60950-1 ? cb iec 60950-1 iec 60601-1 iec 62368-1 ? ccc gb4943.1/gb9254; gb17625.1 ? ce lvd, rohs electrical specifcations input input voltage ra nge 90 - 264 vrms frequency 47 - 63 hz (360 - 440 hz with higher leakage) inrush current 50 apk, cold start leakage current <300 a no load power < 500 mw output maximum power 650 w, forced-air cooling (750 w peak) 400 w, free-air natural convection cooling (650 w peak) adjustment range -0% / +15% holdup time 20 ms @ 400 w fan output 12 v @ 1.0 a (forced air) 12 v @ 0.5 a (natural convection) standby output 5 v @ 2.0 a (forced air) 5 v @ 1.0 a (natural convection) data sheet industrial power
environmental specifcations operating temperature -20 c to +80 c (derate at 50 c), startup at -40 c storage temperature -40 c to +85 c operating humidity 5% to 95% (non-condensing) non-operating humidity 5% to 95% (non-condensing) maximum altitude 5000 m (3000 m for medical), derating may apply other specifcations isolation 4000 vac (input to output) 1500 vac (input to pe; output to pe) line harmonics 61000-3-2, class a esd immunity 61000-4-2; 15kv (air)/8kv (contact); criterion a conducted emi level b, cispr 22 and fcc part 15 radiated emi level b, cispr 22 and fcc part 15 (with cover) surge immunity 61000-4-5, level 3 - criterion a; level 4 - criterion c medical emc 60601-1-2, edition 4 (cover maybe required for some tests) mtbf (telcordia, issue 3, method 1, case 3) > 950 khrs, 25 c, 410 w natural convection > 1.3 mhrs, 25 c, 650 w forced air electrical specifcations (continued) control and protection serial bus interface pmbus ? current share active remote sense 2-wire (+ and -) remote inhibit pull inhibit low = main & fan output off (5 v standby is on) pull inhibit high (or foating) = all outputs on ac ok active high when normal ac input is present (with internal 10k ohm pull up to 3.3 vdc) dc ok active high when main o/p is within regulation (with internal 10k ohm pull up to 3.3 vdc) smart fan control monitor, control and override overvoltage protection latching / ac recyle or inhibit toggle required for psu restart overload protection auto-recovery (constant current mode down to 50% vout) overtemperature protection auto-recovery with hysteresis cns650-m series data sheet
ordering information model number output voltage vout adjust range (-0% /+15%) minimum load max. continuous load (free air) max. peak load (free air) 1 max. continuous load (forced air) 2 max. peak load (forced air) 2 regulation 3 ripple (p-p) 4 cns653-me 5, 6 12 v 12 - 13.8 v 0 a 54.2 a 62.5 a na na 2% 120 mv cns653-mf 5 12 v 12 - 13.8 v 0 a 30.8 a 54.2 a 54.2 a 62.5 a 2% 120 mv cns653-mu 12 v 12 - 13.8 v 0 a 33.3 a 54.2 a 54.2 a 62.5 a 2% 120 mv cns655-mu 24 v 24 - 27.6 v 0 a 16.7 a 27.1 a 27.1 a 31.3 a 2% 240 mv cns658-mu 48 v 48 - 55.2 v 0 a 8.3 a 13.5 a 13.5 a 15.6 a 2% 480 mv 1 peak load current not to exceed 10 seconds, ta = 50 c. 2 requires at least 400 lfm of airfow. 3 at 25 c including factory setpoint, line voltage and load current variations. 4 peak-to-peak ripple measured at the output terminal with 20 mhz bandwidth and 10 f (tantalum capacitor) in parallel with 0.1 f capacitor across the output. 5 optional suffx -me (end-fan) and -mf: (open-frame) available on the 12 v output. 6 80 plus certifed. input connections (-mu and -mf suffx) pin function power supply side system side tb1 pe dinkle ehk762v-03p max torque: 4kgf-cm recommended wire size: awg #22 to #14 tb2 l2/neutral tb3 l1/line input connections (-me suffx) pin function power supply side system side iec inlet input ac iec 60320 c14 (male) iec cord c13 (female) output connections pin function power supply side system side bar1 -vout output terminal screw: m4x8 (4x) max torque: 10kgf-cm molex 19099-0032 or 19141-0063 for awg #16 to #14 molex 19099-0048 or 19141-0083 for awg #12 to #10 bar2 -vout bar3 +vout bar4 +vout other output and control connections (connector j304) pin designation description 1 5vsb +5 v standby output j304 20-pin connector (psu side): 2 5vsb +5 v standby output landwin: 2052p20008t or 3 5vsb_gnd +5 v standby output return/ground cvilux: ci0120p1hd0-lf 4 scl serial clock signal (i2c) 5 a0 eeprom address recommended mating connectors: 6 sda serial data signal (i2c) cvilux: ci0120sd000 (housing) 7 i_share active current share pin ci01td21pe0 (contact pins) 8 sys_gnd return ground for signals and i2c landwin: 2050s2000 (housing) 9 12vfan 12 v fan output 2053t021v (contact pins) 10 remote inhibit output inhibit pin (main output) jst: phdr-20vs (housing) 11 fan_rtn 12 v fan output return/ground sphd-001t-p0.5 (contact pins) 12 vin_good input line ok signal 13 fan_pwm1 fan pwm 14 pwok output power ok signal see accessories section 15 fan_tach1 fan1 tacho signal 16 fan_override external fan sensor for override 17 fan_fail fain fail signal 18 fan_fault_en fan fault enable due to low rpm 19 remote_sense+ positive remote sense 20 remote_sense- remote sense return cns650-m series data sheet
mechanical drawings (-mu suffx for u-base construction/12 v, 24 v and 48 v) input connector dinkle ehk762v-03p torque: 4kgf-cm max. pem f-m3-1 (2x) 2.5 mm max penetration depth from face of side chassis j304 output terminals screw m4x8 (4x) torque: 10kgf-cm max. 20-way signal connector model label pem f-m3-1 (2x) pem f-m3-1 (4x) 120 30 (2x) 39.2 16.2 16.2 120 30 (2x) 39.2 0.5 26.2 100 (2x) 152.4 0.5 75 (2x) 13.3 101.6 0.5 1.9 ref pe l n j306 fan connector l1 l-0p vr408 trimpot for output adjustability counter-clockwise: increase output voltage 3.0 mm max penetration depth from face of bottom chassis c40 d1 thermal hot spot reference component temperature limit (-mu) d1 (ac bridge diode) 105 c l1 (pfc choke) 115 c c40 (output cap) 100 c l-output (output choke) 125 c do not exceed indicated temperature limits to ensure operation is within the component thermal derating limits. measure the component temperatures using k type thermocouples. fan output connector for -mu, -mf suffx (connector j306) pin function description 1 12vfan 12 v fan output j306 4-pin connector (psu side): 2 fan_rtn 12 v fan return cvilux: ci0104p1hk0-lf 3 fan_pwm1 fan pwm landwin: 2003p0401v 4 fan_tach1 fan1 tacho signal recommended mating connectors: cvilux: ci0104s0000 (housing) cvilux: ci01t01mpp0 (contact pins) landwin: 2001s0400 (housing) landwin: 2005t011r (contact pins) unit weight (-mu suffx): 800 g cns650-m series data sheet
mechanical drawings (-mf suffx for open-frame construction/12 v only) input connector dinkle ehk762v-03p torque: 4kgf-cm max. rohs label model label output terminals screw m4x8 (4x) torque: 10kgf-cm max. 20-way signal connector 4.5 141.9 152.4 0.5 43.9 1 12.7 1 88.8 4.5 143.4 4 88.3 96.8 0.5 1.9 ref 34.1 0.5 2.5 ref 0.5 ref l-0p 4x m3 mounting hole vr408 trimpot for output adjustability counter-clockwise: increase output voltage j306 fan connector j304 c40 d1 pe l n l1 thermal hot spot reference component temperature limit (-mf) d1 (ac bridge diode) 120 c l1 (pfc choke) 120c c40 (output cap) 100 c l-output (output choke) 125 c do not exceed indicated temperature limits to ensure operation is within the component thermal derating limits. measure the component temperatures using k type thermocouples. unit weight (-mf suffx): 650 g cns650-m series data sheet
mechanical drawings (-me suffx for end-fan construction/12 v only) pem f-m3-1 (2x) model label pem f-m3-1 (2x) pem f-m3-1 (4x) ac inlet output terminals screw m4x8 (4x) torque: 10kgf-cm max. 20-way signal connector 152.4 177.8 0.5 101.6 0.5 4.8 ref (2x) 30 16.2 120 16.2 120 1.9 ref (2x) 30 40 0.5 13.3 (2x) 75 26.2 (2x) 100 55.8 20 j304 vr408 trimpot for output adjustability counter-clockwise: increase output voltage unit weight (-me suffx): 1000 g cns650-m series data sheet
performance curves level b figure 1. output power vs. ambient temperature at natural convection and forced air cooling figure 2. output power vs. input line at natural convection and forced air cooling figure 3. typical effciency for 12 v output figure 4. typical effciency for 24 v output figure 5. typical effciency for 48 v output 0 100 200 300 400 500 600 700 0 10 20 30 40 50 60 70 80 90 output power [watts] ambient temperature [ c] output power derating convection (mf) convection (mu) 400 lfm (mf/mu) 200 lfm (mf/mu) me (end fan) 0 100 200 300 400 500 600 700 90 110 130 150 170 190 210 230 250 270 output ? power ? [watts] ac ? input ? line ? [vac] output ? power ? vs. ? input ? line convection ? (mf) convection ? (mu) 400 ? lfm ? (mf/mu) 200 ? lfm ? (mf/mu) me ? (end ? fan) 89% 90% 91% 92% 93% 94% 95% 96% 0 0.2 0.4 0.6 0.8 1 efficiency ? (%) output ? load ? (% ? of ? 650w) cns653 \ mx ? (12v) ? efficiency ? curve 115 ? vac 230 ? vac 89% 90% 91% 92% 93% 94% 95% 96% 0 0.2 0.4 0.6 0.8 1 efficiency ? (%) output ? load ? (% ? of ? 650w) cns655 \mx ? (24v) ? efficiency ? curve 115 ? vac 230 ? vac 89% 90% 91% 92% 93% 94% 95% 96% 0 0.2 0.4 0.6 0.8 1 efficiency ? (%) output ? load ? (% ? of ? 650w) cns658 \ mx ? (48v) ? efficiency ? curve 115 ? vac 230 ? vac figure 6. estimated product useful life based on c40 case temperature 0 25 50 75 100 125 150 75 80 85 90 95 100 105 110 lifetime [khrs] c40 temperature [ c] estimated service life vs. component temp esimated life 0 10 20 30 40 50 60 0 0.2 0.4 0.6 0.8 1 spl db(a) load cns653 - me fan noise vs. load figure 7. cns653-me (end fan) typical audible noise level vs. output load at 90 vac, ~30 c ambient. cns650-m series data sheet
worldwide offices americas 2900 s.diablo way tempe, az 85282 usa +1 888 412 7832 europe (uk) waterfront business park merry hill, dudley west midlands, dy5 1lx united kingdom +44 (0) 1384 842 211 asia (hk) 14/f, lu plaza 2 wing yip street kwun tong, kowloon hong kong +852 2176 3333 for more information: www.artesyn.com/power for support: productsupport.ep@artesyn.com www.artesyn.com artesyn embedded technologies, artesyn and the artesyn embedded technologies logo are trademarks and service marks of artesyn embedded technologies, inc. all other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. ? 2017 artesyn embedded technologies, inc. all rights reserved. for full legal terms and conditions, please visit www.artesyn.com/legal. cns650-m series ds 24jan2017 accessories orderable part number description description 73-788-001 j304 (20 pin) mating connector with 0.3 m wires attached pin 20 pin 2 pin 19 pin 1 pin 3 300 5 mm cns-bbar-kit output bussbar extension kit for vertical wire interface 73-769-002 usb to i 2 c adaptor for pmbus communication cns650-m series data sheet
|
